Dead On Double Trigger
Shoot faster with two fingers. This kit pops right into the A5. Includes tournament legal trigger guard. Use this kit for an insane rate of fire. 100% drop-in accessory.

Dead On Rear Velocity Adjuster
Try this option for fast, trouble-free installation of the A-5 RVA. All you have to do is pull out the two pins, slide out the stock end piece on your A-5, slide this RVA in and re-insert the pins. It's simple and will take less than a minute.

Dead On Bullet Drop - Black
Designed for the CO2 20oz, nitro or HPA player. The player that needs the big drop for the big tank. It moves your tank 5 1/2 inches forward and 2.5 inches down. It also includes an ASA with a hole for a gauge if you need it. (The hole is plugged when you get it. You can either leave the plug in, or remove the plug to install a gauge.) It has holes drilled to mount on standard OR Spyder bottomlines. Will work with all CO2 tanks and screw-in nitrogen tanks

This design has the On/Off valve with degassing feature. As you loosen the knob it will empty your gun (but not your tank) of air so that you can unscrew your tank and not have to worry about residual trapped air or pulling the trigger to rid your gun of the air. No more torn up tank o-rings.

Dead On Grip Adapter Block
This aluminum adapter block mounts on the bottom of the A-5 grip and allows you to attach a wide variety of bottle adapters

Dead On Vertical Adapter
Lets you mount an expansion adapter, reg, or CO2 tank at the stock front grip location. The A5VA still allows for the no tool field strip feature. Heat sink fins to the swivel connector to help transfer heat to the gas and a good look. The VA gives the user a very good balance and feel.

Gas Thru Grip or Expansion Chamber
Expansion Chambers convert liquid CO2 over to gas in your marker for more consistent operation.